Noztek Filament Winder 2.0


Filament winder with laser sensor, feeds directly onto your 3d printer.

SKU: WINDERV2 Category:


Noztek have launched a new precision filament winding system. Designed from the ground up to enhance your extruding experience, this filament winder has an embedded touch screen which allows greater control over your winding process. The Winder 2.0 is capable of winding up to a 2.2Kg spool at a time, with extreme accuracy.

This unit is a must for anyone using a Noztek extruder as it enhances the filament tolerances and directly winds all the extruded filament neatly onto a spool. When the winding is done, simply remove the spool and load it directly to your 3D printer.

The winding guide is powered by a belt driven linear actuator using a stepper motor and controlled by our own bespoke software.

We used the laser sensor from our previous winder and tweaked the code for more accuracy. Powered by our own bespoke PCB and Arduino mega and encased secured by a robust metal chassis; this is a professional winding system that can reliably handle any size spool up to 2.2 Kg.

The winder also incorporates a programmable sensor and laser module. It calculates the winding speed by monitoring the height of the filament being extruded, in turn altering the speed of the spool motor to give tangle free results.

Winder Screen 1
Winder Screen showing start up menu. From here choose your operating mode


There are two easy to use mode settings ‘automatic’ and ‘testing’, used interchangeably as you customise according to the materials you’re working with. As a default, the winder is calibrated to spool standard 1.75mm and 3mm filament tolerances. This winding system has been specifically designed to work together with our Filament Tolerence Puller.

Filament Winder 2.0 rear



Please note: It is not possible to wind transparent filament with this machine. The laser sensor will not detect this as a solid material and so will not respond properly. This winding system needs to be used in conjunction with the tolerance puller…

This unit is supplied in 220v and 110v versions.




Not sure which Winder to choose? Please see our product spec comparison chart below



the Winder 2.0 is also available as part of our Full Extrusion System; the ultimate line-up for professional extrusion on your desktop.

Additional Information

Weight 5 kg
Dimensions 42 × 42 × 42 cm