The Noztek Pro Pellet & Powder Filament Extruder for 3D Printing
With retail filament prices being so expensive we identified a need to reduce the cost of plastic for 3D printing and have built a reliable filament extruder for use at home or office. The Noztek Pro combines a high torque planetary motor and a bespoke engineered screw, which offers fast extrusion of ABS ans PLA resin pellets at tight tolerances. Most of the other extruder’s currently on the market are in kit form, which is great for the enthusiast, but as 3D printers become mainstream we felt that consumers would much rather have a plug and play model. The Noztek Pro can be unboxed and is ready to use in about 15 minutes, just plug in, turn on the heater add the resin pellets, then turn on the motor and you will be extruding straight away.
The Noztek Pro will make a 1KG of filament in just 2 hours, right from your desktop, you can use a wide range of plastics, ABS, PLA or even recycled to make low-cost, high-quality filament. Bulk wholesale resin pellets can be purchased very cheaply from a wide range of suppliers allowing you to extrude your own filament for a fraction of the cost of buying from retailers.
All Noztek pro filament extruder’s are supplied with a pre-heater band
It has been tested using ABS or PLA but some of our customers are using a range of different plastics, HDPE, HIPS or even UPVC, you can even recycle other different types of plastics and even old unwanted 3D prints. You can also mix and make your own coloured filament, using readily available master batch pellets, you can mix these in the hopper and this opens up a whole new range of colour options.
- Converts either a variety of plastic Pellets (ABS, PET, HIPS, PLA ) or powder to either 1.75mm or 3mm filament (Both dies included). Blanks also available.
- Extrudes at 1-300 Celsius
- Bespoke screw design
- Swappable barrel
- Filament tolerances 1.75mm (+ .04/ – .04)
- Fully assembled and ready to make filament right out of the box (not a kit).
- Extrudes at up to 2-2.5m per minute (Depending on extrusion temp and plastic).
- Produces 1kg of filament in 2/3 hours
- Simple to use.
For UK customers we will ship a 240v unit. If you are ordering for overseas please let us know the voltage and frequency required, as we also keep 110v units in stock.
Kit Includes: 1 Fully assembled Filament Extruder, 0.5 kg ABS Pellets (to get started right away), 2 dies (1.75mm and 3mm), 1 instruction manual. Everything you need to be extruding within 15 minutes of opening package. Warranty: 1 Year return to base.
The shipping crate dimensions are 30cm x 30cm x 80cm, the weight is approximately 13Kg.